אדר יבוא ושיווק פרזול

601 / 670

כרסמים לרוטר ושקענים
601 03-9529998 : ראשל”צ טל 1 אדר יבוא ושיווק פרזול בע”מ רחוב דוד רזיאל 03-9511511 :פקס 16
Drilling & Countersinking
MNS MN
MNK MN
MNT
Heat-treated and DHN* treated.
One Flute.
For best results use drill press.
A drill press must be used for making
tapered plugs up to 16mm long. This
ensures a tight fit - no gap around the plug.
This solves the problem of irregular holes
or plugs as a result of runout in the drill
press etc.You just tap a plug into a hole
until you meet resistance, then cut off the
excess.
Drill press must be used.
For making plugs up to 16mm Long.
Plug Cutters - Self Ejecting Plug Cutters - Self Ejecting
Tapered TCT Plug Cutters - 2 flutes Plug Cutters - Self Ejecting
Carbide Tipped Plug Cutters - 2 flutes
Tool No. D H max L
MNS0804 8 19 56
MNS0954 9.5 19 62
MNS1004 10 19 62
MNS1204 12 19 62
MNS1274 12.7 19 62
MNS1504 15 19 63
MNS1604 16 19 63
MNS1904 19 19 63
Tool No. D L d
MN20008 20 140 13
MN25008 25 140 13
MN30008 30 140 13
MN35008 35 140 13
Tool No. D H max L d
MN09505 9.5 19 61 8
MN10005 10 19 61 8
MN12005 12 19 61 8
MN12705 12.7 19 61 8
MN16007 16 19 75 10
MN19007 19 19 75 10
Extra long design - up to 50mm length of plugs
MNL0955 9.5 50 94 8
Tool No. D H max L d
MNT0953 9.5 16 58 6
MNT1003 10 16 58 6
MNT1203 12 16 58 6
MNT1603 16 16 58 6
MNT0952 9.5 16 65 12
MNT1272 12.7 16 65 12
MNT1602 16 16 65 12
Tool No. D1 D2 D H max L d
MNK1302 12 13 27.5 16 72 12
MNK1602 15.2 16.2 29.5 16 71 12
MNK2002 18.3 19.5 33 16 71 12
Heat-treated and DHN* treated.
One Flute.
For best results use drill press.
Quick-Change 1/4” (6.3mm)
HEX Shank.
HS Heat-treated steel.
*DHN - Advanced surface treatment for extended life